|
|
|
 |
Stock No. BOS103201202
Female quick release nipple.
|
|
|
 |
Stock No. BOS103205152
A standard Male hose connector for use with Stanley Bostitch range of Compressors.CEJN 320 series.1/4in B.S.P. fitting
|
|
|
 |
Stock No. BOS103205202
Female Nipple.
|
|
|
 |
Stock No. BOS1063000
These 23 gauge mini pins are headless fine wire pins that are indispensible for fine molding and trim work. As the pins are completely headless , the wood closes over them after driving eliminating the need for time consuming fillingThey are also excellent for temporary tacking whilst glue dries, as they can be removed with little damage to the wor
|
|
|
 |
Stock No. BOS1191501
S2 Crown Staple for use with the 438S2R1 Wide Crown Stapler.Staple Finish: GalvanisedStaple Width. 25mmStaple Leg Length. 15mmQty. Box of 16800S2 Crown Staple for use with the 438S2R1 Wide Crown Stapler.Staple Finish: GalvanisedStaple Width. 25mmStaple Leg Length. 15mmQty. Box of 16800
|
|
|
 |
Stock No. BOS121072
Soft nose for protection of the workpiece. Ideal for delicate work.
|
|
|
 |
Stock No. BOS18G15FC
BT13 Series Galvanised 18 Gauge Brad Nails & Fuel.To Suit GBT1850K Cordless Gas Bran NailerFinish nails (Brads) and T nails are normally of a rectangular cross section instead of being round.Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries. Finish
|
|
|
 |
Stock No. BOS1840600E
Also known as 84 series.For use with TU-216-84-E or other tools using 84 gauge.Wire gauge 0.5mm x 1mm, 12.3mm crown staple with 6mm leg length
|
|
|
|
Stock No. BOS1840800E
Also known as 84 series.For use with TU-216-84-E or other tools using 84 gauge.Wire gauge 0.5mm x 1mm, 12.3mm crown staple with 8mm leg length.
|
|
|
|
Stock No. BOS1841000E
Also known as 84 series.For use with TU-216-84-E or other tools using 84 gauge.Wire gauge 0.5mm x 1mm, 12.3mm crown staple with 10mm leg length.
|
|
|
|
Stock No. BOS1841200E
Also known as 84 series.For use with TU-216-84-E or other tools using 84 gauge.Wire gauge 0.5mm x 1mm, 12.3mm crown staple with 12mm leg length.
|
|
|
|
Stock No. BOS1841400E
Also known as 84 series.For use with TU-216-84-E or other tools using 84 gauge.Wire gauge 0.5mm x 1mm, 12.3mm crown staple with 14mm leg length.
|
|
|
 |
Stock No. BOS19PM
P.C.L. connector, not compatible with CEJN3201/4IN B.S.P. fitting
|
|
|
 |
Stock No. BOS28R50G12F
PT Series Ring Shank Clipped Head 33° Nails & Fuel.Profile: RingRing shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for
|
|
|
|
Stock No. BOS28R50HD
PT Series Ring Shank Clipped Head 33° Nails & Fuel.Profile: RingRing shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for
|
|
|
|
Stock No. BOS28R50FC
PT Series Ring Shank Clipped Head 33° Nails & Fuel.Profile: RingRing shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for
|
|
|
|
Stock No. BOS2850FC
PT PaperTape Series Smooth Shank Clipped Head 33° Nails & Fuel.Profile: SmoothSmooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lowest of the group. They require less energy to drive
|
|
|
|
Stock No. BOS28R63G12F
PT Series Ring Shank Clipped Head 33° Nails & Fuel.Profile: RingRing shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for
|
|
|
|
Stock No. BOS2863G12FC
PT PaperTape Series Smooth Shank Clipped Head 33° Nails & Fuel.Profile: SmoothSmooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lowest of the group. They require less energy to drive
|
|
|
|
Stock No. BOS28R63FC
PT Series Ring Shank Clipped Head 33° Nails & Fuel.Profile: RingRing shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for
|
|
|
|
Stock No. BOS2863FC
PT PaperTape Series Smooth Shank Clipped Head 33° Nails & Fuel.Profile: SmoothSmooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lowest of the group. They require less energy to drive
|
|
|
|
Stock No. BOS28R70G12F
PT Series Ring Shank Clipped Head 33° Nails & Fuel.Profile: RingRing shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for
|
|
|
|
Stock No. BOS2870G12FC
PT PaperTape Series Smooth Shank Clipped Head 33° Nails & Fuel.Profile: SmoothSmooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lowest of the group. They require less energy to drive
|
|
|
|
Stock No. BOS2870FC
PT PaperTape Series Smooth Shank Clipped Head 33° Nails & Fuel.Profile: SmoothSmooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lowest of the group. They require less energy to drive
|
|
|
|
Stock No. BOS28R75G12F
PT Series Ring Shank Clipped Head 33° Nails & Fuel.Profile: RingRing shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for
|
|
|
|
Stock No. BOS28R75FC
PT Series Ring Shank Clipped Head 33° Nails & Fuel.Profile: RingRing shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for
|
|
|
Hand Tools