|
|
|
 |
Stock No. AEGBWS12KIT2
Ideal for plunge cutting, scraping and sanding this 12 Volt multi function tool, which due to its interchangeable heads, is ideally suited for working in hard to reach areas. It has an angle drill head with 10 mm keyless chuck and a multi Tool head, electronic speed control and overload protection, reversible and has LED lighting of the workspace.
|
|
|
 |
Stock No. AEG352237
|
|
|
 |
Stock No. AEG352249
|
|
|
 |
Stock No. AEG352463
|
|
|
 |
Stock No. AEGB1214G
The AEG B1214G is a 12 Volt NiCD battery suitable for 12 Volt AEG machines. It has a capacity of 1.4Ah
|
|
|
 |
Stock No. AEGB1420R
Global battery systemSelf cleaning contacts result always in best power transmissionDouble sided contacts for lowest resistance between battery and tool;more holes per battery chargeOptimized temperature managementProtected contacts (battery+tool); less risk of short circuitService friendly: housings are available as spare partsNo memory effect14.4
|
|
|
 |
Stock No. AEGB1814G
The AEG B1814G 18 Volt NiCD replacement battery has a capacity of 1.4Ah
|
|
|
 |
Stock No. AEGB1820R
Global battery systemSelf cleaning contacts result always in best power transmissionDouble sided contacts for lowest resistance between battery and tool;more holes per battery chargeOptimized temperature managementProtected contacts (battery+tool); less risk of short circuitService friendly: housings are available as spare partsNo memory effect18 V
|
|
|
 |
Stock No. AEGB2420
The AEG B2420 is a 24 Volt NiCD replacement battery pack for 24 volt AEG machines.
|
|
|
 |
Stock No. AEGBAL18
LED Area and spotlight which uses 18 volt AEG NiCd, NiMh or Li-ion batteries (not supplied) Run time on a fully charged 1.5Ah battery is 6 hours and weighs 318g.
|
|
|
 |
Stock No. AEGOBBH24G
Versatile 2 mode 24v SDS HammerVariable speed, Reverse and brake for total controlLarge 20 mm concrete drilling capacityPowerful 2 Joule impact energyBuilt in spirit levels for accuracy13 mm keyless chuck adaptorVoltage - 24 V No load speed - 0-1400 rpm Blows Per Min - 0-5200 bpm Impact Energy - 3.2JChuck - SDS +Drilling Wood - 20 mmMetal - 13 mmMa
|
|
|
 |
Stock No. AEGOBFL18V
18 Volt flourescent light with 360° all-around illumination.Uses GBS Battery System and has a retractable metal hanging hook.
|
|
|
 |
Stock No. AEGOBH22EL
- Powerful 650 watt motor- 22 mm drilling capacity in concrete- Safety clutch for user protection- Variable speed electronics for control- Hammer action stop for drilling in wood or metal, forward and reverse mechanismPower input - 650 wattPower output - 325 wattNo load speed - 0-1290 rpmBlow energy - 2.5 JTool reception - SDS-PlusHammer rate (full
|
|
|
 |
Stock No. AEGOBMS180
- Innovative design for confined spaces- Operational with one hand due to slim compact design- 3500 strokes per minute and 13 mm stroke length for fast cutting applications- FIXTEC for fast and easy keyless blade change- Built-in LED- 2 Finger variable speed triggerWeight 2.2 kgStroke length 13 mmStrokes per minute 0-3
|
|
|
 |
Stock No. AEGOBMS18LI
- Innovative design for confined spaces- Operational with one hand due to slim compact design- 3500 strokes per minute and 13 mm stroke length for fast cutting applications- FIXTEC for fast and easy keyless blade change- Built-in LED- 2 Finger variable speed triggerWeight 2.2 kgStroke length 13 mmStrokes per minute 0-3
|
|
|
 |
Stock No. AEGOBS12C
- Compact pocket drill/screwdriver measuring only 160mm- Integrated Keyless Chuck- 17 stage torque adjustment plus additional drilling stage- Industrial metal gearbox and gears for superior durability - FIXTEC spindle lock and keyless 10mm chuck - Electronic switch with variable speed- Built in LED light illuminates the work surface Voltage 12 Volt
|
|
|
 |
Stock No. AEGOBS12C2
2-speed with variable speed on the trigger. 10mm keyless chuck. 2 x 1.5Ah Li-ion batteries and a 30-minute fast charger. Supplied with a carry case , Torch and a handy 40-piece mixed accessory set - including a 5m tape and a knife.
|
|
|
 |
Stock No. AEGBS12C2KIT
2-speed, 33Nm maximum torque.2 x 1.5Ah Li-Ion batteries.Supplied in an AEG Power Box with a 100-piece accessory set, charger, torch and folding knife.
|
|
|
 |
Stock No. AEGBS12C2L1
This AEG compact drill driver has a 17 stage adjustable torque dial so you get the same consistency when drilling delicate work pieces, this helps to cut down the risk of damaging your work. Also fitted with soft grip trigger and handle for your comfort and a built in LED light at the front for those poorly lit areas or on site where power may not
|
|
|
|
Stock No. AEGBS12C2L2
This AEG compact drill driver has a 17 stage adjustable torque dial so you get the same consistency when drilling delicate work pieces, this helps to cut down the risk of damaging your work. Also fitted with soft grip trigger and handle for your comfort and a built in LED light at the front for those poorly lit areas or on site where power may not
|
|
|
 |
Stock No. AEGOBS14XLI
- Compact & powerful 14v drill driver- 40Nm maximum torque delivers complete power- 23-stage torque adjustment for complete control- Electronic switch with variable speed- 2-speed gearbox- FIXTEC 13 mm full metal Rohm keyless chuck, with spindle lockTechnical Specification:Weight - 1.8 kgMetal : 13mmWood : 32 mmChuck 1.5-13 mmMax
|
|
|
 |
Stock No. AEGOBS14XN
- Compact & powerful 14v drill driver- 40Nm maximum torque delivers complete power- 23-stage torque adjustment for complete control- Electronic switch with variable speed- 2-speed gearbox- FIXTEC 13 mm full metal Rohm keyless chuck, with spindle lockTechnical Specification:Weight - 1.8 kgMetal : 13mmWood : 32 mmChuck 1.5-13 mmMax
|
|
|
 |
Stock No. AEGOBS18C0
- Small, compact & powerful for high torque applications- 51 Nm maximum torque delivers complete power- 2-speeds - 0-450 rpm/0-1650 rpm- Integrated clutch and chuck for a more compact design- LED for work place illumination- Forward and reverseWeight 2.2 kgDrilling metal/wood 13/36mmChuck 13mmMax torque 52 NmNo loa
|
|
|
 |
Stock No. AEGBS18CL3P
The A.E.G. BS 18CL, with PRO Li-Ion battery technology is a powerful 18 volt compact drill driver with a 23-stage torque adjustment an additional drilling stage which provides greater flexibility and precision whatever the material and screw size. The BS18C has the most up to date electronic switch with variable speed for improved accuracy and
|
|
|
|
Stock No. AEGBS18CL15P
The A.E.G. BS 18CL, with PRO Li-Ion battery technology is a powerful 18 volt compact drill driver with a 23-stage torque adjustment an additional drilling stage which provides greater flexibility and precision whatever the material and screw size. The BS18C has the most up to date electronic switch with variable speed for improved accuracy and
|
|
|
 |
Stock No. AEGOBSB144G
Compact & powerful.32 Nm maximum torque.2-speeds: 0-400rpm/0-1400 rpm. 24-stage torque adjustment. Fixtec 10 mm single sleeve chuck with full metal jaws.Specification: No. of batteries: 2 x 1.4 Ah.Charger: 60-min. Weight: 1.8 Kg. Drilling wood/metal/masonry: 32/10/8 mm. Chuck: 1.5-10 mm. Max. torque: 32 Nm. No-load speed 0-400/0-1.400 rpm. Vol
|
|
|
.
Hand Tools