|
|
|
 |
Stock No. ESTE14A
One piece solid forged construction, fully polished and with leather grip.Length of cutting edge is 2.3/4in. (69mm)Supplied with a leather sheath.
|
|
|
 |
Stock No. ESTE16C
Solid one piece forged steel construction. Excellent balance.Handle grip made from sole leather washers pressed on and riveted. Grip is polished and double lacquered. Conventional carpenters curved claw.Size. 16oz.
|
|
|
 |
Stock No. ESTE16S
Solid one piece forged steel construction. Excellent balance.Handle grip made from sole leather washers pressed on and riveted. Grip is polished and double lacquered.Straight claw is useful for batten removal or prising floorboards as well as general nail pulling. Size. 16oz.
|
|
|
 |
Stock No. ESTE20C
Solid one piece forged steel construction. Excellent balance.Handle grip made from sole leather washers pressed on and riveted. Grip is polished and double lacquered. Conventional carpenters curved claw.Size. 20oz.
|
|
|
|
Stock No. ESTE20S
Solid one piece forged steel construction. Excellent balance.Handle grip made from sole leather washers pressed on and riveted. Grip is polished and double lacquered.Straight claw is useful for batten removal or prising floorboards as well as general nail pulling. Size. 20oz.
|
|
|
 |
Stock No. ESTE239MM
This hammer is designed for the roofing trade It has a spike for making a hole in the slate, a claw for extracting old nails and a magnetised, recessed head for starting nails accurately Milled face, Vinyl grip, magnetised all steel construction.Weight 22oz. (624g)
|
|
|
 |
Stock No. ESTE239MS
This hammer is designed for the roofing trade It has a spike for making a hole in the slate, a claw for extracting old nails and a magnetised, recessed head for starting nails accurately Milled face, Vinyl grip, magnetised all steel construction.Weight 22oz. (624g)
|
|
|
|
Stock No. ESTE24A
One piece solid forged construction, fully polished and with leather grip.Length of cutting edge is 3.1/4in. (82mm)Supplied with a leather sheath.
|
|
|
 |
Stock No. ESTE24C
Solid one piece forged steel construction. Excellent balance.Handle grip made from sole leather washers pressed on and riveted. Grip is polished and double lacquered. Conventional carpenters curved claw.Size. 24oz.
|
|
|
 |
Stock No. ESTE2H
This hatchet is of a one piece solid forged construction, fully polished and with a leather grip.The rear edge of the blade has a V notch for extracting nails.The cutting edge is 3.5/8in. (93mm) Weight 20oz.There is a hammer head opposite the cutting blade.
|
|
|
 |
Stock No. ESTE311
This dry wall hammer has a cushioned vinyl grip and solid one piece forged construction.Crowned, scored hammer head which reduces the likelihood of impact marks on the plasterboard. Cutaway and notched cutting blades for withdrawing nails and cutting laths.Size.14oz.
|
|
|
 |
Stock No. ESTE316C
Handle grip made from liquid vinyl bonded on to shaft during production. Excellent balance.Finest finish. Made of high quality steel.Conventional carpenters curved claw.Weight. 16oz.
|
|
|
 |
Stock No. ESTE316S
Handle grip made from liquid vinyl bonded on to shaft during production. Excellent balance.Finest finish. Made of high quality steel.Straight claw is useful for batten removal or prising floorboards as well as general nail pulling. Size. 16oz.
|
|
|
 |
Stock No. ESTE320BL
This brick hammer has a cushioned vinyl/nylon grip and a solid one piece forged construction.Accurately ground chisel end for clean cutting. Weight 20oz.
|
|
|
|
Stock No. ESTE320C
Handle grip made from liquid vinyl bonded on to shaft during production. Excellent balance.Finest finish. Made of high quality steel.Conventional carpenters curved claw.Size. 20oz.
|
|
|
|
Stock No. ESTE320S
Handle grip made from liquid vinyl bonded on to shaft during production. Excellent balance.Finest finish. Made of high quality steel.Straight claw is useful for batten removal or prising floorboards as well as general nail pulling. Weight. 20oz.
|
|
|
 |
Stock No. ESTE322P
A square section hammer, with a flat face at one end and pick at the other.Used by slaters or geologists.Liquid vinyl grip bonded on to shaft during production.Weight 22oz.
|
|
|
 |
Stock No. ESTE322S
Designed for frame work.Handle grip made from Liquid Vinyl, bonded onto the all steel shaft during production.Straight claw, long handle for greater impact when striking nail.Weight 22oz.
|
|
|
 |
Stock No. ESTE3239MM
This hammer is designed for the roofing trade It has a spike for making a hole in the slate, a claw for extracting old nails and a magnetised, recessed head for starting nails accurately Milled face, Vinyl grip, magnetised all steel construction.Weight 22oz. (624g)
|
|
|
 |
Stock No. ESTE324BL
This brick hammer has a cushioned vinyl/nylon grip and a solid one piece forged construction.Accurately ground chisel end for clean cutting. Weight 24oz.
|
|
|
|
Stock No. ESTE324S
Designed for frame work.Handle grip made from Liquid Vinyl, bonded onto the all steel shaft during production.Straight claw, long handle for greater impact when striking nail.Weight 24oz.
|
|
|
 |
Stock No. ESTE325S
Designed for frame work.Handle grip made from Liquid Vinyl, bonded onto the all steel shaft during production.Straight claw, long handle for greater impact when striking nail.Weight 25oz.Length 18in
|
|
|
 |
Stock No. ESTE328C
Handle grip made from liquid vinyl bonded on to shaft during production. Excellent balance.Finest finish. Made of high quality steel.Conventional carpenters curved claw.Size. 24oz.
|
|
|
|
Stock No. ESTE328S
Designed for frame work.Handle grip made from Liquid Vinyl, bonded onto the all steel shaft during production.Straight claw, long handle for greater impact when striking nail.Weight 28oz.
|
|
|
|
Stock No. ESTE330S
Designed for frame work.Handle grip made from Liquid Vinyl, bonded onto the all steel shaft during production.Straight claw, long handle for greater impact when striking nail.Weight 30oz.
|
|
|
 |
Stock No. ESTEB32LB
The proper tool for driving hardened nails and cold chisels.One piece steel hammer with handle grip made from liquid vinyl bonded on to shaft during production.Weight. 2lb.
|
|
|
Hand Tools