|
|
|
|
 |
Stock No. MOL890001
Replacement gas filter for the 8000 series half mask. ABEK1 protection against organic [boiling point >65°C] + inorganic gases & vapours, acid gases and ammonia. Tested and certified to EN 14387:2004+A1:2008.
|
|
|
 |
Stock No. MOL10301
Moldex Bitrex Fit Testing Kit. The Approved Code of Practices supporting COSHH, CAR and CLAW stipulate that tight-fitting RPE (respiratory protective equipment) MUST be fit tested as part of the selection process. This is to ensure that the selected RPE has the potential to provide adequate protection for the wearer. There are two main reasons fo
|
|
|
 |
Stock No. MOL6900
Moldex Corded Pura-Fit Disposable Earplugs are made from comfortable PU foam, this soft material is easy to insert. Ideal for protecting against long term exposure and higher noise levels. They are brightly coloured for easy compliance checks. Has a signal to noise ratio (SNR) of 36 dB.
|
|
|
 |
Stock No. MOL6451
Moldex Corded reusable Twisters® Trio Earplugs have a multi-curved stem that rotates, providing a custom fit. They have a soft, washable TPE pod, meaning that they are reusable, they can be used for several weeks before disposal. Fitted with a large handle for easy insertion and removal. They are supplied in a handy storage container to keep th
|
|
|
 |
Stock No. MOL6441
Moldex Corded Semi-Reusable Twisters® Earplugs have a multi-curved stem that rotates, providing a custom fit. Soft foam pods allow for a comfortable, snug seal. These plugs are semi-reusable, they can be used for several days before disposal. Fitted with a large handle for easy insertion and removal. The cord can be attached at any desired leng
|
|
|
 |
Stock No. MOL7812
These Moldex Comfortable PU Foam Earplugs protect against long-term exposure. The contored shape makes them easy to insert. Comes with a pocket pack storage container and five pairs of earplugs. Has a signal to noise ratio (SNR) of 35 dB.
|
|
|
 |
Stock No. MOL7625
The Moldex MOL7625 Disposable Foam Mellows® Earplugs Station contains 250 pairs of Mellows® earplugs. The station is made from recyclable material and with only 2% wastage, the dispenser puts protection at the centre of the workforce. The plugs remain hygienic as the dispenser mechanism is automatically replaced with every refill. The Mell
|
|
|
 |
Stock No. MOL9400
Moldex EasyLock® Filters for Series 7000 & 9000 masks. No need for additional clips or holders, different gas and particulate filters can be combined. EasyLock® particulate filters can either be connected to the EasyLock® gas cartridge or directly to the mask body. adaptors or particulate pre-filters are not necessary. ABEK1 protec
|
|
|
 |
Stock No. MOL9430
Moldex EasyLock® Filters for Series 7000 & 9000 masks. No need for additional clips or holders, different gas and particulate filters can be combined. EasyLock® particulate filters can either be connected to the EasyLock® gas cartridge or directly to the mask body. Adaptors or particulate pre-filters are not necessary. ABEK1 protec
|
|
|
 |
Stock No. MOL9030
Moldex EasyLock® Filters for Series 7000 & 9000 masks. No need for additional clips or holders. Different gas and particulate filters can be combined. EasyLock® particulate filters can either be connected to the EasyLock® gas cartridge or directly to the mask body. Adaptors or particulate pre-filters are not necessary. P3 R D for pr
|
|
|
 |
Stock No. MOL6700
Moldex Jazz-Band® Banded Earplugs provide a cost-effective and convenient option against intermittent noise throughout the day. Dual material technology reduces noise transmission. Neck cord with safety release mechanism. The new design reduces band pressure by 40%. Comes with a pair of spare pods. Replacement pods are available separately. H
|
|
|
 |
Stock No. MOL6200
The Moldex M2 Earmuffs are ideal to protect from intermittent noise or for those who cannot achieve a safe and comfortable fit with earplugs. Moulded ear cup grips the head to make fitting and alignment quick and easy. The wide range of moulded ear cup adjustment gives best pressure distribution for all sizes. The M2 Ear Muff has a soft coat mater
|
|
|
 |
Stock No. MOL6110
Moldex M-Series Earmuffs are flexible and lightweight with an appealing, stylish design. Seamless workmanship make these earmuffs robust and durable with grip points for easy on-head adjustment. They also feature a smooth sliding mechanism for size adjustment. The extra soft foam air cushions and low contact pressure ensure the M-Series are extreme
|
|
|
 |
Stock No. MOL6120
Moldex M-Series Earmuffs are flexible and lightweight with an appealing, stylish design. Seamless workmanship make these earmuffs robust and durable with grip points for easy on-head adjustment. They also feature a smooth sliding mechanism for size adjustment. The extra soft foam air cushions and low contact pressure ensure the M-Series are extreme
|
|
|
 |
Stock No. MOL6130
Moldex M-Series Earmuffs are flexible and lightweight with an appealing, stylish design. Seamless workmanship make these earmuffs robust and durable with grip points for easy on-head adjustment. They also feature a smooth sliding mechanism for size adjustment. The extra soft foam air cushions and low contact pressure ensure the M-Series are extreme
|
|
|
 |
Stock No. MOL6140
The Moldex MX-7 Helmet Mounted Earmuffs fit helmets with 30mm Euro slots. They have a flexible, lightweight design with smooth sliding size adjustment. Fitted with viscoelastic foam cushions for improved pressure distribution and increased comfort. ;The larger cup openings are designed to fit most ear sizes. Has a signal to noise ratio (SNR) of 31
|
|
|
 |
Stock No. MOL808001
Replacement particulate filter for the 5000 and 8000 series half masks. Particulate filters with pleated filter technology significantly reduces breathing resistance, improves wearer comfort and reduces fatigue. P3 R D protection against harmful and toxic dusts, fumes and aerosols based on water and oil. Tested and certified to EN 143:2000+A1:
|
|
|
 |
Stock No. MOL6825
These Moldex Replacement Pods are suitable for the Moldex Jazz-Band® and WaveBand®banded earplugs. They are made from bright, yellow/green, soft foam for exceptional user comfort. Contains 50 pairs.
|
|
|
 |
Stock No. MOL6400
Reusable Rockets® Earplugs are suitable for protection against long-term exposure. These plugs can be cleaned and reused over longer periods. Dual material composition ensures easy insertion and maximum comfort. With an air bubble in the tip and soft material to provide a comfortable seal. They are supplied in a handy storage container to keep
|
|
|
 |
Stock No. MOL641101
Reusable Rockets® Earplugs are suitable for protection against long-term exposure. These plugs can be cleaned and reused over longer periods. Dual material composition ensures easy insertion and maximum comfort. With an air bubble in the tip and soft material to provide a comfortable seal. They are supplied in a handy storage container to keep
|
|
|
 |
Stock No. MOL6401
Reusable Rockets® Earplugs are suitable for protection against long-term exposure. These plugs can be cleaned and reused over longer periods. Dual material composition ensures easy insertion and maximum comfort. With an air bubble in the tip and soft material to provide a comfortable seal. They are supplied in a handy storage container to keep
|
|
|
 |
Stock No. MOL9120122
Moldex EasyLock® Filters for Series 7000 & 9000 masks. No need for additional clips or holders, different gas and particulate filters can be combined. EasyLock® particulate filters can either be connected to the EasyLock® gas cartridge or directly to the mask body. Adaptors or particulate pre-filters are not necessary. A1 for prote
|
|
|
 |
Stock No. MOL9230122
Moldex EasyLock® Filters for Series 7000 & 9000 masks. No need for additional clips or holders, different gas and particulate filters can be combined. EasyLock® particulate filters can either be connected to the EasyLock® gas cartridge or directly to the mask body. Adaptors or particulate pre-filters are not necessary. A2 for prote
|
|
|
 |
Stock No. MOL9430122
Moldex EasyLock® Filters for Series 7000 & 9000 masks. No need for additional clips or holders, different gas and particulate filters can be combined. EasyLock® particulate filters can either be connected to the EasyLock® gas cartridge or directly to the mask body. Adaptors or particulate pre-filters are not necessary. ABEK1 protec
|
|
|
 |
Stock No. MOL7060
The Moldex MOL7060 Wall mount for Moldex Stations. The Moldex Station is made of durable plastic and can be replaced in one easy step. Please note that the mounting bracket comes separately.
|
|
|
 |
Stock No. MOL6810
Moldex WaveBand® 1K Banded Earplugs provide a cost effective and convenient option against intermittent noise throughout the day. Comfortably worn under the chin away from the body and clothing creating freedom of movement and eliminating the problem of noise transmission. They have an extremely lightweight design, only 12g, with low band press
|
|
|
