|
|
|
|
 |
Stock No. HUL108MINIHV
The Hultafors 108 Hi-Vis Mini Wrecking Bar can be used to pull small nails, strips of wood, or even open tin cans. It has three different functions for pulling out nails and the thin contact surfaces make it easy to use in narrow spaces. Available in 3 high visibility colours, picked at random. Length: 190mm (7.1/2in).Weight: 77g.
|
|
|
 |
Stock No. HUL108DISHV
The Hultafors 108 Hi-Vis Mini Wrecking Bar Display is supplied with: 20 x 108 Hi-Vis Mini Wrecking Bars. They can be used to pull small nails, strips of wood, or open cans. It has three different functions for pulling out nails and the thin contact surfaces make it easy to use in narrow spaces. Avaliable in 3 colours. Length: 190mm (7.1/2in).We
|
|
|
 |
Stock No. HUL108MINI
The Hultafors 108 Mini Wrecking Bar can be used to pull small nails, strips of wood, or open cans. It has three different functions for pulling out nails and the thin contact surfaces make it easy to use in narrow spaces. Length: 190mm (7.1/2in).Weight: 77g.
|
|
|
 |
Stock No. HUL10815
The Hulfafors 108 Wrecking Bar is a small, versatile steel wrecking bar that can be used for pulling out nails and for breaking, scraping and lifting. It has three different functions for pulling out nails and its wide, ground contact surfaces and thin ends make it easy to use in narrow spaces and reduce the risk of leaving marks. Length: 380mm (1
|
|
|
 |
Stock No. HUL109SBADJ
The Hultafors 109 Adjustable Wrecking Bar is manufactured from hardened, high-alloy boron steel. It is jointed at the claw to allow for nine settings. Thanks to its ring gear, it can handle the same strains as a normal wrecking bar. Its wide, ground contact surfaces and thin ends make it easy to use in narrow spaces and reduce the risk of leaving m
|
|
|
 |
Stock No. HUL10925TD
The Hultafors 109 TD Wrecking Bar is made from hardened, high quality steel. Wide, ground contact surfaces and thin ends make it easy to use in narrow spaces and reduce the risk of leaving marks. The claw and chisel are optimised for pulling out nails.
|
|
|
 |
Stock No. HUL10912
The Hultafors 109 Series Wrecking Bars are manufactured from hardened, high-alloy boron steel and have wide, ground contact surfaces and thin ends making them easy to use in narrow spaces and reducing the risk of leaving marks. The claw is optimised for pulling out nails.1 x Hultafors 109/12 Steel Wrecking Bar 300mm (12in)
|
|
|
 |
Stock No. HUL10920
The Hultafors 109 Series Wrecking Bars are manufactured from hardened, high-alloy boron steel and have wide, ground contact surfaces and thin ends making them easy to use in narrow spaces and reducing the risk of leaving marks. The claw is optimised for pulling out nails.1 x Hultafors 109/20 Steel Wrecking Bar 500mm (20in)
|
|
|
 |
Stock No. HUL10925
The Hultafors 109 Series Wrecking Bars are manufactured from hardened, high-alloy boron steel and have wide, ground contact surfaces and thin ends making them easy to use in narrow spaces and reducing the risk of leaving marks. The claw is optimised for pulling out nails.1 x Hultafors 109/25 Steel Wrecking Bar 625mm (25in)
|
|
|
 |
Stock No. HUL10928
The Hultafors 109 Series Wrecking Bars are manufactured from hardened, high-alloy boron steel and have wide, ground contact surfaces and thin ends making them easy to use in narrow spaces and reducing the risk of leaving marks. The claw is optimised for pulling out nails.1 x Hultafors 109/28 Steel Wrecking Bar 710mm (28in)
|
|
|
 |
Stock No. HUL10936
The Hultafors 109 Series Wrecking Bars are manufactured from hardened, high-alloy boron steel and have wide, ground contact surfaces and thin ends making them easy to use in narrow spaces and reducing the risk of leaving marks. The claw is optimised for pulling out nails.1 x Hultafors 109/36 Steel Wrecking Bar 900mm (36in)
|
|
|
 |
Stock No. HUL207400
The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpai
|
|
|
 |
Stock No. HUL207500
The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpai
|
|
|
 |
Stock No. HUL207600
The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpai
|
|
|
 |
Stock No. HUL209SB25
The Hultafors 209 SB Adjustable Wrecking Bar is manufactured in high quality steel with ergonomic rubber-clad handle. It's articulated claw is adjustable to nine different positions. With wide, ground contact surfaces and thin ends make it easy to use and reduce the risk of leaving marks. The claw is optimized for pulling out nails. The curved sect
|
|
|
 |
Stock No. HUL5356PK
A 300mm (12in) and 150mm (6in) combination square twin pack. Each square can act as a try square, mitre square, depth and marking gauge, steel rule, straight edge or a spirit level - gives horizontal 45° and plumb readings.
|
|
|
 |
Stock No. HULPS120
Adjustable Plasterer's Square with millimetre and degree graduations that can be set in four fixed positions (22.5°, 45°, 67.5° and 90°). It also has an additional 21 angles marked on its scale. The stock and blade are made from anodized aluminium and can be folded together, making it easy to store and transport. It can also be swi
|
|
|
 |
Stock No. HULAL30
Chalk line with a cast powder-coated aluminium body with a sliding filler cover. The cord is braided cotton/polyester, the cotton absorbs the chalk while the polyester provides the strength and the braid ensures that the cord never tangles. The cord is 1 mm in diameter and has a rupture limit of 16 Kg. 30 m/100 ft. Capacity: 80 g of chalk.
|
|
|
 |
Stock No. HULPV12060TP
|
|
|
 |
Stock No. HUL840511
The Hultafors Arvika 5 Star Felling Axe has been specially designed for competition and serious chopping. The design of the head is inspired by Australian Racing Pattern Axes, polished and heavy with a convex grind edge. The long and curved handle in American hickory provides maximum speed and force when felling trees. The axe is hand forged and m
|
|
|
 |
Stock No. HULATLE
Versatile, easy-to-use nail puller. Despite its small size, it can easily pull out a 5 in nail, even when the head of the nail is off or buried deep in the wood. Made of red lacquered hardened steel.
|
|
|
 |
Stock No. HUL840792
The Hultafors Axe Grinding Stone is an efficient waterstone for easy and safe sharpening of your axe, wherever you are. The grinding stone is of good size and designed to give a steady grip, protecting fingers and hands from cutting injuries. The elegant leather case protects your grinding stone, giving it a longer working life. The rough side has
|
|
|
 |
Stock No. HULCH3
Hultafors CH3 Chisel Holder allows you to store up to 3 chisels in this unique holder making it easy to find them, especially in a toolbag. Made from hardwearing leather. The holder can also be used on a belt or button.
|
|
|
 |
Stock No. HULEDC25HVK
Hultafors EDC Chisel 25mm and Craftsmen’s knife HVK form the perfect combination, in an easily accessible double holster, made from impact-resistant PP plastic, joined by rivets and hardwearing leather. Japanese steel blades, rust protected by Electrophoretic deposition (EPD). Fitted with heavy-duty handles designed to withstand repeated hamm
|
|
|
 |
Stock No. HULSTK
The Hultafors Chisel Knife is a robust knife with V-ground mortice chisel function. It has a unique method for attaching the sheath around a button on work clothes which means it does not loosen, but is easy to remove. The knife blade is made from Japanese 3mm knife carbon steel that has been hardened to 58-60 HRC. The cutting edge has been sharpen
|
|
|
 |
Stock No. HULSTKHVK
|
|
|
