|
|
|
|
 |
Stock No. MON1010
The Monument 1010 are manufactured from a single piece of malleable iron for greater durability and strength, with a tee handle for greater torque and added leverage, and a 'D' shaped end that fits snug in to most manhole covers for easy and secured lifting. Designed to make the removal of manhole covers an easier operation. Made with a 100mm (4in
|
|
|
 |
Stock No. MON1012
The Monument 1012R Side Entry Manhole Keys have been designed for lifting light duty (pressed steel) manhole covers. These keys are made from 10mm steel bar and the simple 90 degree bent ends allow these keys to be used in a large number of different manhole types. Supplied in a pack of 2.
|
|
|
 |
Stock No. MON1023
Monument blue and white trade trimming knife with push button folding mechanism. Uses 1024C blades.
|
|
|
 |
Stock No. MON1024
Monument trimming knife blades, suitable for the trade trimming knife. Supplied in a dispenser.Quantity: 10.
|
|
|
 |
Stock No. MON1027
Monument Lead Knife is a 6-inch long hooked heavy bladed knife that features a strong wooden handle for added grip. It is ideal for use when cutting lead. The blade is heat treated to give a longer life. Blade length: 150mm (6in).
|
|
|
 |
Stock No. MON1120
Display pack of Monument spare blades to fit junior hacksaws.Blade length: 150mm.Blade width: 6mm.Blade thickness: 0.38mm.TPI: 32.Pack size: 10 blades.
|
|
|
 |
Stock No. MON1277S
The Monument MON1277S Replacement Hose to fit Gas Test Gauges. Length: 1 metre (Coil). Note: Do not use this hose for LPG (low pressure gas).
|
|
|
 |
Stock No. MON1279
Monument Black replacement hose to fit Gas Test Gauges. Length: 1 Metre (carded). Note: Do not use this hose for LPG (Liquified Petroleum Gas).
|
|
|
 |
Stock No. MON1290
The Monument Air Bag is a durable, quality, flexible drain plug for plugging drains and pipes. This plug is fitted with peripheral ribs that will give a better seal and grip on the tube or pipe being repaired or replaced. It has a long feed hose that is fitted with a Schrader valve to quickly release the pressure. For use with Monument drain testi
|
|
|
 |
Stock No. MON1291
The Monument Air Bag is a durable, quality, flexible drain plug for plugging drains and pipes. This plug is fitted with peripheral ribs that will give a better seal and grip on the tube or pipe being repaired or replaced. It has a long feed hose that is fitted with a Schrader valve to quickly release the pressure. For use with Monument drain testi
|
|
|
 |
Stock No. MON1292
The Monument Air Bag Stopper is a durable, quality flexible air bag stopper for the plugging of drains and pipes. This bag is made with a durable nylon outer casing that gives the air bag a better seal and grip on the tube or pipe being repaired or replaced. It has a long feed hose that is fitted with a Schrader valve to quickly release the pressur
|
|
|
 |
Stock No. MON1308
Monument Schrader Valve Pump for airbag stoppers and flexible plugs with Schrader valves.
|
|
|
 |
Stock No. MON131
Monument socket forming tools (copper pipe jointers) are ideal for joining 2 pieces of copper pipe of equal diameter together without using fittings. The loose former allows easier withdrawal of tool after use. The resulting capillary joint that is left can be soft or hard soldered to finish the joint.Monument 131W Socket Forming Tool. Size: 15mm
|
|
|
|
Stock No. MON133
Monument socket forming tools (copper pipe jointers) are ideal for joining 2 pieces of copper pipe of equal diameter together without using fittings. The loose former allows easier withdrawal of tool after use. The resulting capillary joint that is left can be soft or hard soldered to finish the joint.Monument 133C Socket Forming Tool. Size: 22mm
|
|
|
|
Stock No. MON134
Monument socket forming tools (copper pipe jointers) are ideal for joining 2 pieces of copper pipe of equal diameter together without using fittings. The loose former allows easier withdrawal of tool after use. The resulting capillary joint that is left can be soft or hard soldered to finish the joint.Monument 134F Socket Forming Tool. Size: 28mm
|
|
|
 |
Stock No. MON1368
The Monument MON1368 1368U 2 Piece Test Plug Set is used for blocking off small pipes such as copper pipes for dry testing prior to commissioning. They cannot be used for air testing purposes by themselves. 2 Plugs supplied: 1 x 1370B 15mm Test Plug. 1 x 1371E 22mm Test Plug.
|
|
|
 |
Stock No. MON1369
This Monument set of 6 Test Plugs contains the following small bore test plugs: 2 x 1370B 15mm Test Plug. 2 x 1371E 22mm Test Plug. 2 x 1372H 28mm Test Plug. Used for blocking off small pipes such as copper pipes for dry testing prior to commissioning. Cannot be used for air testing purposes by themselves.
|
|
|
 |
Stock No. MON1374
Monument Drain Testing Plugs are durable, quality flexible drain plug for the plugging of drains and pipes. This plug is easy to use and are available in 3 and 4-inch versions. Fitted with removable top caps and rubber rings. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob
|
|
|
 |
Stock No. MON1376
Monument Drain Testing Plugs are durable, quality flexible drain plug for the plugging of drains and pipes. This plug is easy to use and are available in 3 and 4-inch versions. Fitted with removable top caps and rubber rings. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob
|
|
|
 |
Stock No. MON1377
Monument Drain Testing Plugs are durable, quality flexible drain plug for the plugging of drains and pipes. This plug is easy to use and are available in 3 and 4-inch versions. Fitted with removable top caps and rubber rings. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob
|
|
|
|
Stock No. MON1378
Monument Drain Testing Plugs are durable, quality flexible drain plug for the plugging of drains and pipes. This plug is easy to use and are available in 3 and 4-inch versions. Fitted with removable top caps and rubber rings. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob
|
|
|
|
Stock No. MON1379
Monument Drain Testing Plugs are durable, quality flexible drain plug for the plugging of drains and pipes. This plug is easy to use and are available in 3 and 4-inch versions. Fitted with removable top caps and rubber rings. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob
|
|
|
 |
Stock No. MON138
Monument socket forming tools (copper pipe jointers) are ideal for joining 2 pieces of copper pipe of equal diameter together without using fittings. The loose former allows easier withdrawal of tool after use. The resulting capillary joint that is left can be soft or hard soldered to finish the joint.MON138 138r 15 & 22mm Copper Pipe Jointer
|
|
|
 |
Stock No. MON1445
The Monument MON1445 1445F spare hose for connecting testing equipment comes in the following: Length: 1 metre (3/8 inch).
|
|
|
 |
Stock No. MON1452
The Monument hydro-jet pump safely provides the explosive power of a water jet to unblock sinks, baths, showers, toilets and drains. First you fill the unit with water then hold the unit over the waste and pump down (or hit) the handle to create a powerful water jet to help clear any blockage. To clean the MON1452 simply just flush with clean wate
|
|
|
 |
Stock No. MON1456
Monument force cups or plungers are used to remove blockages from bath and sink waste pipes by building up the air pressure.1 x Monument 1456N Small Force Cup Plunger 75mm (3in)
|
|
|
