|
|
|
|
 |
Stock No. MAW1961M
The Moore & Wright Traditional External Micrometer has a pearl chrome plated frame with insulation pads, tungsten carbide measuring faces and a tapered bow frame. The 'speeder' type ratchet, locking lever and adjusting key make this micrometer easy to use. It has a 6.5mm spindle diameter. The micrometers are manufactured to BS870, DIN 863/1, I
|
|
|
 |
Stock No. MAW1965
The Moore & Wright Traditional External Micrometer has a blue textured frame finish with tungsten carbide measuring faces and a tapered bow frame. The 'speeder' type ratchet, locking lever and adjusting key make this micrometer easy to use. It has a 6.5mm spindle diameter. The micrometers are manufactured to BS870, DIN 863/1, ISO 361 standards
|
|
|
 |
Stock No. MAW1965M
The Moore & Wright Traditional External Micrometer has a blue textured frame finish with tungsten carbide measuring faces and a tapered bow frame. The 'speeder' type ratchet, locking lever and adjusting key make this micrometer easy to use. It has a 6.5mm spindle diameter. The micrometers are manufactured to BS870, DIN 863/1, ISO 361 standards
|
|
|
 |
Stock No. MAW19662
The Moore & Wright 966 Series Traditional External Micrometer has a blue textured frame finish with tungsten carbide measuring faces. The 'speeder' type ratchet, locking lever and adjusting key make this micrometer easy to use. It has a 6.5mm spindle diameter. The micrometers are manufactured to BS870, DIN 863/1, ISO 361 standards. Supplied i
|
|
|
 |
Stock No. MAW1966M50
The Moore & Wright 966 Series Traditional External Micrometer has a blue textured frame finish with tungsten carbide measuring faces. The 'speeder' type ratchet, locking lever and adjusting key make this micrometer easy to use. It has a 6.5mm spindle diameter. The micrometers are manufactured to BS870, DIN 863/1, ISO 361 standards. Supplied i
|
|
|
 |
Stock No. MAW33012
The Moore & Wright Firm Joint Inside Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly that provides a firm and rigid friction joint, with no play. The sizes listed are the effective leg length which is measured from the joint assembly. The Firm Joint Inside Calipers are manufactured to BS3123 s
|
|
|
 |
Stock No. MAW3306R
The Moore & Wright Firm Joint Inside Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly that provides a firm and rigid friction joint, with no play. The sizes listed are the effective leg length which is measured from the joint assembly. The Firm Joint Inside Calipers are manufactured to BS3123 s
|
|
|
 |
Stock No. MAW3308
The Moore & Wright Firm Joint Inside Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly that provides a firm and rigid friction joint, with no play. The sizes listed are the effective leg length which is measured from the joint assembly. The Firm Joint Inside Calipers are manufactured to BS3123 s
|
|
|
 |
Stock No. MAW33112
The Moore & Wright Firm Joint Outside Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly that provides a firm and rigid friction joint, with no play. The sizes listed are the effective leg length which is measured from the joint assembly. The Firm Joint Outside Calipers are manufactured to BS3123
|
|
|
 |
Stock No. MAW33118
The Moore & Wright Firm Joint Outside Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly that provides a firm and rigid friction joint, with no play. The sizes listed are the effective leg length which is measured from the joint assembly. The Firm Joint Outside Calipers are manufactured to BS3123
|
|
|
 |
Stock No. MAW33124
The Moore & Wright Firm Joint Outside Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly that provides a firm and rigid friction joint, with no play. The sizes listed are the effective leg length which is measured from the joint assembly. The Firm Joint Outside Calipers are manufactured to BS3123
|
|
|
 |
Stock No. MAW3316R
The Moore & Wright Firm Joint Outside Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly that provides a firm and rigid friction joint, with no play. The sizes listed are the effective leg length which is measured from the joint assembly. The Firm Joint Outside Calipers are manufactured to BS3123
|
|
|
 |
Stock No. MAW3318
The Moore & Wright Firm Joint Outside Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly that provides a firm and rigid friction joint, with no play. The sizes listed are the effective leg length which is measured from the joint assembly. The Firm Joint Outside Calipers are manufactured to BS3123
|
|
|
 |
Stock No. MAW3366R
The Moore & Wright Firm Joint Jenny Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly that provides a firm and rigid friction joint, with no play. The leg which holds the round adjustable hardened point is offset and model 341 has a locating spur on the straight leg. The sizes listed are the effe
|
|
|
 |
Stock No. MAW341R
The Moore & Wright Firm Joint Jenny Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly that provides a firm and rigid friction joint, with no play. The leg which holds the round adjustable hardened point is offset and model 341 has a locating spur on the straight leg. The sizes listed are the effe
|
|
|
 |
Stock No. MAW40012
The Moore & Wright Engineer's Squares have a precision ground blade and stock and a blind riveted construction. The blade has been hardened and tempered for longer life. Conforms to B5939/Grade B.The Moore & Wright 40012 Engineers Square Grade B 300mm (12in) has the following specification: Blade Size: 355.6 x 44.4mm.Stock Size: 177.8 x
|
|
|
|
Stock No. MAW4003
The Moore & Wright Engineer's Squares have a precision ground blade and stock and a blind riveted construction. The blade has been hardened and tempered for longer life. Conforms to B5939/Grade B.The Moore & Wright 4003 Engineers Square Grade B 75mm (3in) has the following specification: Blade Size: 104.8 x 25.4mm.Stock Size: 68.5 x 25.4m
|
|
|
|
Stock No. MAW4004
The Moore & Wright Engineer's Squares have a precision ground blade and stock and a blind riveted construction. The blade has been hardened and tempered for longer life. Conforms to B5939/Grade B.The Moore & Wright 4004 Engineers Square Grade B 100mm (4in) has the following specification: Blade Size: 130.2 x 25.4mm.Stock Size: 76.2 x 25.
|
|
|
|
Stock No. MAW4006
The Moore & Wright Engineer's Squares have a precision ground blade and stock and a blind riveted construction. The blade has been hardened and tempered for longer life. Conforms to B5939/Grade B.The Moore & Wright 4006 Engineers Square Grade B 150mm (6in) has the following specification: Blade Size: 181.0 x 25.4mm.Stock Size: 101.6 x 25
|
|
|
|
Stock No. MAW4009
The Moore & Wright Engineer's Squares have a precision ground blade and stock and a blind riveted construction. The blade has been hardened and tempered for longer life. Conforms to B5939/Grade B.The Moore & Wright 4009 Engineers Square Grade B 225mm (9in) has the following specification: Blade Size: 273.1 x 38.1mm.Stock Size: 139.7 x 38
|
|
|
 |
Stock No. MAW5010
The Moore & Wright Spring Dividers are manufactured from polished tool steel and the points are hardened to over 550Hv. The bow spring ensures uniform tension over working range and they are fitted with a centrally mounted adjustment screw. These Spring Dividers comply with BS3123 standards. Note: The nominal size is the distance between the
|
|
|
 |
Stock No. MAW5012
The Moore & Wright Spring Dividers are manufactured from polished tool steel and the points are hardened to over 550Hv. The bow spring ensures uniform tension over working range and they are fitted with a centrally mounted adjustment screw. These Spring Dividers comply with BS3123 standards. Note: The nominal size is the distance between the
|
|
|
 |
Stock No. MAW503R
The Moore & Wright Spring Dividers are manufactured from polished tool steel and the points are hardened to over 550Hv. The bow spring ensures uniform tension over working range and they are fitted with a centrally mounted adjustment screw. These Spring Dividers comply with BS3123 standards. Note: The nominal size is the distance between the
|
|
|
 |
Stock No. MAW504R
The Moore & Wright Spring Dividers are manufactured from polished tool steel and the points are hardened to over 550Hv. The bow spring ensures uniform tension over working range and they are fitted with a centrally mounted adjustment screw. These Spring Dividers comply with BS3123 standards. Note: The nominal size is the distance between the
|
|
|
 |
Stock No. MAW506R
The Moore & Wright Spring Dividers are manufactured from polished tool steel and the points are hardened to over 550Hv. The bow spring ensures uniform tension over working range and they are fitted with a centrally mounted adjustment screw. These Spring Dividers comply with BS3123 standards. Note: The nominal size is the distance between the
|
|
|
 |
Stock No. MAW508
The Moore & Wright Spring Dividers are manufactured from polished tool steel and the points are hardened to over 550Hv. The bow spring ensures uniform tension over working range and they are fitted with a centrally mounted adjustment screw. These Spring Dividers comply with BS3123 standards. Note: The nominal size is the distance between the
|
|
|
