|

|
 |
Stock No. THO10
Thor hide hammers have malleable Iron head fitted with two cylindrical faces of compressed buffalo hide on a wooden shaft. The malleable Iron head provides the weight for the blow and the hide faces absorb the shock whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a
|
|
 |
Stock No. THO1010
Thor Dead Blow Hammers have a coated die-cast aluminium alloy head with a rubber grip and screw-in faces. The hollow die-cast head is partially filled with steel shot to add to the weight, prevent rebound and deliver dead blows of maximum force. All faces are one-piece moulded with a shoulder for extra strength and to prevent fracture from misdir
|
|
 |
Stock No. THO108
Thor Hide Mallets have a one-piece cylindrical compressed hide head that provides a large striking surface with a relatively light head weight. They are fitted with an oval wood handle. Widely used in sheet metal forming, the jewellery trade and on copper, brass and other soft materials that need to be shaped etc.108: Size 0. Weight 60g (2oz).Dia
|
|
 |
Stock No. THO10R
Thor replacement cylindrical faces are constructed from compressed hide, these are for use with a malleable iron split head hammer. Hide faces will absorb the shock of the blow and transfer the force to the item being struck without fear of damage. The Thor hide faces are ideal where a heavy blow is required in a relatively small striking area.
|
|
 |
Stock No. THO110
Thor Hide Mallets have a one-piece cylindrical compressed hide head that provides a large striking surface with a relatively light head weight. They are fitted with an oval wood handle. Widely used in sheet metal forming, the jewellery trade and on copper, brass and other soft materials that need to be shaped etc.Size: 1. Weight 115g (1/4 lb).Dia
|
|
 |
Stock No. THO112
Thor Hide Mallets have a one-piece cylindrical compressed hide head that provides a large striking surface with a relatively light head weight. They are fitted with an oval wood handle. Widely used in sheet metal forming, the jewellery trade and on copper, brass and other soft materials that need to be shaped etc.Size: 2. Weight 170g (6oz).Diamet
|
|
 |
Stock No. THO114
Thor Hide Mallets have a one-piece cylindrical compressed hide head that provides a large striking surface with a relatively light head weight. They are fitted with an oval wood handle. Widely used in sheet metal forming, the jewellery trade and on copper, brass and other soft materials that need to be shaped etc.Size: 3. Weigh : 225g (1/2 lb).Di
|
|
 |
Stock No. THO116
Thor Hide Mallets have a one-piece cylindrical compressed hide head that provides a large striking surface with a relatively light head weight. They are fitted with an oval wood handle. Widely used in sheet metal forming, the jewellery trade and on copper, brass and other soft materials that need to be shaped etc.Size: 4. Weight 340g (3/4 lb)Diam
|
|
 |
Stock No. THO12
Thor hide hammers have malleable Iron head fitted with two cylindrical faces of compressed buffalo hide on a wooden shaft. The malleable Iron head provides the weight for the blow and the hide faces absorb the shock whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a
|
|
 |
Stock No. THO120
Thor Hide Mallets have a one-piece cylindrical compressed hide head that provides a large striking surface with a relatively light head weight. They are fitted with an oval wood handle. Widely used in sheet metal forming, the jewellery trade and on copper, brass and other soft materials that need to be shaped etc.Size: 5. Weight 570g (1 1/4 lb).D
|
|
 |
Stock No. THO1212
Thor Dead Blow Hammers have a coated die-cast aluminium alloy head with a rubber grip and screw-in faces. The hollow die-cast head is partially filled with steel shot to add to the weight, prevent rebound and deliver dead blows of maximum force. All faces are one-piece moulded with a shoulder for extra strength and to prevent fracture from misdir
|
|
 |
Stock No. THO122
Thor Hide Mallets have a one-piece cylindrical compressed hide head that provides a large striking surface with a relatively light head weight. They are fitted with an oval wood handle. Widely used in sheet metal forming, the jewellery trade and on copper, brass and other soft materials that need to be shaped etc.Size: 6. Weight 680g (1 1/2 lb).D
|
|
 |
Stock No. THO125NF
Thor replacement split head nylon faces. Made from hard white nylon shore, hardness D 61-65. The best all-purpose nylon face for light and heavy assembly work.For use with size 1 Thor split head hammers. Face diameter: 32 mm (1 1/4 in).
|
|
 |
Stock No. THO12R
Thor replacement cylindrical faces are constructed from compressed hide, these are for use with a malleable iron split head hammer. Hide faces will absorb the shock of the blow and transfer the force to the item being struck without fear of damage. The Thor hide faces are ideal where a heavy blow is required in a relatively small striking area.
|
|
 |
Stock No. THO14
Thor hide hammers have malleable Iron head fitted with two cylindrical faces of compressed buffalo hide on a wooden shaft. The malleable Iron head provides the weight for the blow and the hide faces absorb the shock whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a
|
|
 |
Stock No. THO1414
Thor Dead Blow Hammers have a coated die-cast aluminium alloy head with a rubber grip and screw-in faces. The hollow die-cast head is partially filled with steel shot to add to the weight, prevent rebound and deliver dead blows of maximum force. All faces are one-piece moulded with a shoulder for extra strength and to prevent fracture from misdir
|
|
 |
Stock No. THO14R
Thor replacement cylindrical faces are constructed from compressed hide, these are for use with a malleable iron split head hammer. Hide faces will absorb the shock of the blow and transfer the force to the item being struck without fear of damage. The Thor hide faces are ideal where a heavy blow is required in a relatively small striking area.
|
|
 |
Stock No. THO150NF
Thor replacement split head nylon faces. Made from hard white nylon shore, hardness D 61-65. The best all-purpose nylon face for light and heavy assembly work.For use with size 2 Thor split head hammers. Face diameter: 38 mm (1 1/2 in).
|
|
 |
Stock No. THO16
Thor hide hammers have malleable Iron head fitted with two cylindrical faces of compressed buffalo hide on a wooden shaft. The malleable Iron head provides the weight for the blow and the hide faces absorb the shock whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a
|
|
 |
Stock No. THO1616
Thor Dead Blow Hammers have a coated die-cast aluminium alloy head with a rubber grip and screw-in faces. The hollow die-cast head is partially filled with steel shot to add to the weight, prevent rebound and deliver dead blows of maximum force. All faces are one-piece moulded with a shoulder for extra strength and to prevent fracture from misdir
|
|
 |
Stock No. THO16R
Thor replacement cylindrical faces are constructed from compressed hide, these are for use with a malleable iron split head hammer. Hide faces will absorb the shock of the blow and transfer the force to the item being struck without fear of damage. The Thor hide faces are ideal where a heavy blow is required in a relatively small striking area.
|
|
 |
Stock No. THO175NF
Thor replacement split head nylon faces. Made from hard white nylon shore, hardness D 61-65. The best all-purpose nylon face for light and heavy assembly work.For use with size 3 Thor split head hammers. Face diameter: 44 mm (1 3/4 in).
|
|
 |
Stock No. THO200NF
Thor replacement split head nylon faces. Made from hard white nylon shore, hardness D 61-65. The best all-purpose nylon face for light and heavy assembly work.For use with size 4 Thor split head hammers. Face diameter: 50 mm (2 in).
|
|
 |
Stock No. THO2020
Thor Dead Blow Hammers have a coated die-cast aluminium alloy head with a rubber grip and screw-in faces. The hollow die-cast head is partially filled with steel shot to add to the weight, prevent rebound and deliver dead blows of maximum force. All faces are one-piece moulded with a shoulder for extra strength and to prevent fracture from misdir
|
|
 |
Stock No. THO208
These Thor hammers are a general-purpose, soft-faced hammer for automotive and general engineering applications in assembly, repair and maintenance operations. Available in 6 different weights. The malleable iron head is fitted with one hide and one copper face on a polished wooden handle. (No.4 size hammer has a slip-on handle - all other sizes
|
|
 |
Stock No. THO210
These Thor hammers are a general-purpose, soft-faced hammer for automotive and general engineering applications in assembly, repair and maintenance operations. Available in 6 different weights. The malleable iron head is fitted with one hide and one copper face on a polished wooden handle. (No.4 size hammer has a slip-on handle - all other sizes
|
|
|