|
|
|
|
 |
Stock No. PRI10314
Manufactured from heat-treated tool steel, this dual function tool is used firstly to set the rivet up and then to form the head.Size 6.5 x 140mm (1/4 x 5 1/2 in)
|
|
|
|
Stock No. PRI10318
Manufactured from heat-treated tool steel, this dual function tool is used firstly to set the rivet up and then to form the head.Size 3 x 115mm (1/8 x 4 3/4 in).
|
|
|
|
Stock No. PRI103316
Manufactured from heat-treated tool steel, this dual function tool is used firstly to set the rivet up and then to form the head.Size 5 x 125mm (3/16 x 5 in).
|
|
|
|
Stock No. PRI103332
Manufactured from heat-treated tool steel, this dual function tool is used firstly to set the rivet up and then to form the head.Size 2.5 x 115mm (3/32 x 4 3/4 in).
|
|
|
|
Stock No. PRI103532
Manufactured from heat-treated tool steel, this dual function tool is used firstly to set the rivet up and then to form the head.Size 4 x 125mm (5/32 x 5 in).
|
|
|
 |
Stock No. PRI103A18
A hexagonal bodied Rivet Snap with the working end heat-treated to ensure a long life.This tool is used for the forming of heads on solid rivets.Size 3 X 115mm (1/8 x 4 1/2 in)
|
|
|
|
Stock No. PRI103A316
A hexagonal bodied Rivet Snap with the working end heat-treated to ensure a long life.This tool is used for the forming of heads on solid rivets.Size 5 x 125mm (3/16 x 5 in)
|
|
|
|
Stock No. PRI103A332
A hexagonal bodied Rivet Snap with the working end heat-treated to ensure a long life.This tool is used for the forming of heads on solid rivets.Size 2.5 x 115mm (3/32 x 4 1/2 in)
|
|
|
 |
Stock No. PRI122
Double ended scriber having two points, one bent at 90° giving improved access in confined spaces. Length: 177mm (7in).
|
|
|
 |
Stock No. PRI127
This scriber can be used for marking or scoring many materials including wood, metal, laminates and plastics. Length: 125mm (5in).
|
|
|
 |
Stock No. PRI129
Combination scriber with a knurled body to give a positive finger grip and sharp ground, heat treated points to give a long life. Having one point and one knife edge, it is ideal for marking wood, plastic and laminates. Length: 165mm (6.1/2in).
|
|
|
 |
Stock No. PRI135116
A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 1.6mm (1/16 in).
|
|
|
 |
Stock No. PRI13514
A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 6.4mm (1/4 in).
|
|
|
 |
Stock No. PRI13518
A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 3.2mm (1/8 in).
|
|
|
 |
Stock No. PRI135316
A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 4.8mm (3/16 in).
|
|
|
|
Stock No. PRI135332
A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 3/32in.
|
|
|
 |
Stock No. PRI13538
A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 9.5mm (3/8 in).
|
|
|
 |
Stock No. PRI135516
A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 8mm (5/16 in).
|
|
|
|
Stock No. PRI135532
A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 4.0mm (5/32 in)
|
|
|
|
Stock No. PRI135732
A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 5.5mm (7/32 in).
|
|
|
 |
Stock No. PRI135SET6
A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Walleted set of 6 containing one of each of the following sizes. 1/16, 1/8, 3/16, 1/4, 5/16, and 3/8in.
|
|
|
 |
Stock No. PRI135SET9
A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Walleted set of 9 containing one of each of the following sizes. 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, and 3/8in.
|
|
|
 |
Stock No. PRI14514
Hexagonal bodied parallel pin punches with extra long pins. Used for driving out long retaining pins. The pin should be first started with a hand or taper punch to avoid damage to the point of the pin punch. Pin length: 63mm (2.1/2in).Overall length: 152mm (6in).Size. 6.4mm (1/4 in).
|
|
|
 |
Stock No. PRI14518
Hexagonal bodied parallel pin punches with extra long pins. Used for driving out long retaining pins. The pin should be first started with a hand or taper punch to avoid damage to the point of the pin punch. Pin length: 63mm (2.1/2in).Overall length: 152mm (6in).Size. 3.2mm (1/8 in).
|
|
|
 |
Stock No. PRI145316
Hexagonal bodied parallel pin punches with extra long pins. Used for driving out long retaining pins. The pin should be first started with a hand or taper punch to avoid damage to the point of the pin punch. Pin length: 63mm (2.1/2in).Overall length: 152mm (6in).Size. 4.8mm (3/16 in).
|
|
|
 |
Stock No. PRI145532
Hexagonal bodied parallel pin punches with extra long pins. Used for driving out long retaining pins. The pin should be first started with a hand or taper punch to avoid damage to the point of the pin punch. Pin length: 63mm (2.1/2in).Overall length: 152mm (6in).Size. 4mm (5/32 in).
|
|
|
