|

|
 |
Stock No. EDM0365
Slate and Tinsnip set. The slate cutter features an integral hole punch and will shape slate, eternit, everit and fibre-cement up to 7mm. Cutting length: 35mm (1 3/8) in. Cuts without any dust or crumbling. The compound action aviation snips have long life, non-slip serrated blades - perfect for cutting zinc (even for wire fencing) or PVC. Maximu
|
|
 |
Stock No. EDM0310
Plier action roof slate tile cutter with spring loaded handles. This model also has a slate hole punch which operates by closing the handles. Approx length: 300 mm /12in. Features: Replaceable blade and punch. Punch diameter: 3.2 mm (1/8in). Cutting length: 35 mm per single pressure. Cutting width: 2.8 mm (0.109in).
|
|
 |
Stock No. EDM0320
Plier type roof slate tile cutter with spring loaded handles. Approx length: 300mm (12 in). Will cut slate up to 7mm (9/32 in) thick.
|
|
 |
Stock No. EDM0311
35 mm blade - only for 0310 and 0320 slate cutters.
|
|
 |
Stock No. EDM0412
The Edma Baby Grafer 16/20 Hog Ring Pliers include a stop guide for a stronger hold on the hog ring. They have patented ergonomic handles with a stainless steel coiled spring that has an anti rust coating for increased usage over time. For user safety and easy storage the handles feature a closing ring. There are also two wire cutters, located on
|
|
 |
Stock No. EDM0313
Die - only for 0310 and 0320 slate cutters.
|
|
 |
Stock No. EDM1333
Double tipped scribe for marking and scoring wall and floor tiles. Also ideal for manmade roofing slates.
|
|
 |
Stock No. EDM0619
Ergotop Multiprofil Metal Frame Pliers for use in drywall installation. With a special application for right and left setting. Punch process. Universal stud crimping tool, able to work on both sides of the stud. No screws or anchors needed. Ergonomic design, special soft-grip handles. Replaceable punch. Specification Max Capacity: 1mm + 1mmJa
|
|
 |
Stock No. EDM0420
Galvanised steel Omega hog rings for use with fencing pliers.Pack of 1,000 Omega 20 hog rings.
|
|
 |
Stock No. EDM0332
Heavy-duty roof batten remover with up to 1 tonne resistance, with a soft grip handle.
|
|
 |
Stock No. EDM1338
Clamping kit for safely securing ladders for transportation or storage.
|
|
 |
Stock No. EDM1330
Large slate guillotine which cuts up to 12mm (1/2in) thick natural slates in one easy action. Suitable for cutting natural slate only. Overall length: 840mm (33in).Weight: 8.1kg (18lb).
|
|
 |
Stock No. EDM1010
Spare blade for 0101 and 0110.
|
|
 |
Stock No. EDM0620
Master profil single handed setting pliers for use in drywall insulation. Maximum capacity 0.8mm + 0.8mm. Quick and efficient punching for the setting of studs and channels. Length 260mm (10 1/4 in). Weight 725g (26oz). Special features: single handed compound action. No screws or anchors needed. Ergonomic design with special soft-grip handle.
|
|
 |
Stock No. EDM0350
Designed for the progressive reduction of the pipe diameter. For stainless steel pipe up to 0.8mm (1/32in). Length: 265 mmWeight: 554g Special features: Ergonomic design with special soft grip handles.Swaging up to 52 mm
|
|
 |
Stock No. EDM0101
Monodex Nibbler Shears are easier to use in many applications than conventional tinsnips. The upward cutting action of the blade cuts through mild steel up to 20 gauge and most non-ferrous metals up to 18 gauge thickness. Cuts without distorting the sheet. Cutting Capacities: Stainless steel: 0.6mm (22Ga; 0.023in).Galvanised steel, zinc, sheet me
|
|
 |
Stock No. EDM0700
Designed for cutting plastic sections, rubber glazing joints, decorative mouldings, tile trim and PVC tape. Cutting shears for standard corners and angles. 56 mm utility knife blade. Special features: cuts from 0° to 45° . Ergonomic design.
|
|
 |
Stock No. EDM0710
The Edma Multicoup Extra Universal Cutting Tool also known as mitre shears. With variable angle cuts. Eliminates the need for a mitre box. Fitted with ergonomic, soft grip handles for increased comfort. For use on decorative moulding, wooden skirting boards, rubber seals and PVC section. Specification Length: 240mmWeight: 422g
|
|
 |
Stock No. EDM0330
Guillotine type heavy-duty roof slate tile cutter of 210mm (8.1/4in) capacity. Designed to cut slates up to 7mm (9.3/2in) thick. The frame is fitted with a mounting hook for fixing to lathes or a bench.
|
|
 |
Stock No. EDM0610
Profil 2 RM Section Setting Pliers are a section setting tool. These metal frame pliers are for quick and efficient punching and setting of rails and studs in drywall insulation. They make it possible to work close to a wall and no screws or anchors are needed. Specification Jaw Opening: 15mmLength: 330mm (13in)Width: 60mm (2.3/8in)
|
|
 |
Stock No. EDM0600
Section setting pliers for stud and track. Length: 350mm (14in).Capacity: 1 + 1mm (18 + 18 gauge); (0.039 + 0.039in).Weight: 936g (33oz).
|
|
 |
Stock No. EDM0315
Repair kit for 0320 and 0310 slate cutters.
|
|
 |
Stock No. EDM0659
This threaded rod cutter provides a clean, waste, noise and spark-free cut which can be bolted immediately. It can also be used to straighten damaged threaded rods. Integral 545mm adjustable rulerNo fire permit is necessary for use in critical areasM7 rod (7mm diameter) 150 thread, to be cut on 10mm diameter slot - for heating, ventilation, air-co
|
|
 |
Stock No. EDM0890
Laminate/MDF flooring guillotine. Cuts neatly without tearing the laminate layer. No breathable dust. Noise free. Does not need sharpening. Maximum cutting width: 210mm. Maximum cutting thickness: 10mm. Trestle rest for long boards. Includes waste collector.
|
|
 |
Stock No. EDM0899
Edma Straight Vario Laminate / MDF Guillotine is perfect for straight cuts, in length and angled cuts, up to 90° in laminate flooring. It leaves a neat cut without damaging the laminate layer. It doesn't require re-sharpening, no noise and no breathable dust is left behind. Comes with: Protective Felt Pads, 1 x Mini Trestle for long boards, 1
|
|
 |
Stock No. EDM0411
The Edma Top Grafer 20/22 Hog Ring Pliers have a robust, lightweight design and are supplied with an easy to fit magzine cartridge, that can hold upto 50 hog rings. The magazine can be removed, for easy storage, via the easy fit screw. The pliers have patented ergonomic handles with a stainless steel coiled spring that has an anti rust coating for
|
|
|