For the duration of the Coronavirus crisis this website will be for reference only.
If you have an enquiry please contact us on 01702 391791.
Thankyou.

View Basket
View/Edit Basket  
Items: 0
Total: ú0.00

Basket Total: ú0.00

Q.Max


Q.Max

Q.Max Sheet Metal Punch 1 1/8in
£13.59  
Q.Max Sheet Metal Punch 1 1/8in Stock No. QMA118

A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge. The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches boxed singly without key, which should be orde
Q.Max Sheet Metal Punch 1.1/16in
£13.27  
Q.Max Sheet Metal Punch 1.1/16in Stock No. QMA1716

A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge. The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches boxed singly without key, which should be orde
Q.Max Sheet Metal Punch 1.1/2in
£19.12  
Q.Max Sheet Metal Punch 1.1/2in Stock No. QMA112

A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge. The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches boxed singly without key, which should be orde
Q.Max Sheet Metal Punch 1.1/4in
£14.78  
Q.Max Sheet Metal Punch 1.1/4in Stock No. QMA114

A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge. The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches boxed singly without key, which should be orde
Q.Max Sheet Metal Punch 1.3/16in
£14.29  
Q.Max Sheet Metal Punch 1.3/16in Stock No. QMA1916

A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge. The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches boxed singly without key, which should be orde
Q.Max Sheet Metal Punch 1.3/4in
£23.04  
Q.Max Sheet Metal Punch 1.3/4in Stock No. QMA134

A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge. The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches boxed singly without key, which should be orde
Q.Max Sheet Metal Punch 1.3/8in
£16.49  
Q.Max Sheet Metal Punch 1.3/8in Stock No. QMA138

A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge. The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches boxed singly without key, which should be orde
Q.Max Sheet Metal Punch 1.5/8in
£21.80  
Q.Max Sheet Metal Punch 1.5/8in Stock No. QMA158

A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge. The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches boxed singly without key, which should be orde
Q.Max Sheet Metal Punch 1/2in
£10.49  
Q.Max Sheet Metal Punch 1/2in Stock No. QMA12

A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge. The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches boxed singly without key, which should be orde
Q.Max Sheet Metal Punch 10mm
£10.24  
Q.Max Sheet Metal Punch 10mm Stock No. QMA10M

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordere
Q.Max Sheet Metal Punch 11/16in
£10.73  
Q.Max Sheet Metal Punch 11/16in Stock No. QMA1116

A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge. The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches boxed singly without key, which should be orde
Q.Max Sheet Metal Punch 11mm
£10.24  
Q.Max Sheet Metal Punch 11mm Stock No. QMA11M

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordere
Q.Max Sheet Metal Punch 12.7mm
£10.49  
Q.Max Sheet Metal Punch 12.7mm Stock No. QMA127M

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordere
Q.Max Sheet Metal Punch 13/16in
£11.30  
Q.Max Sheet Metal Punch 13/16in Stock No. QMA1316

A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge. The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches boxed singly without key, which should be orde
Q.Max Sheet Metal Punch 14mm
£10.49  
Q.Max Sheet Metal Punch 14mm Stock No. QMA14M

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordere
Q.Max Sheet Metal Punch 15.2mm
£10.73  
Q.Max Sheet Metal Punch 15.2mm Stock No. QMA152M

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordere
Q.Max Sheet Metal Punch 15mm
£10.73  
Q.Max Sheet Metal Punch 15mm Stock No. QMA15M

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordere
Q.Max Sheet Metal Punch 16mm
£10.73  
Q.Max Sheet Metal Punch 16mm Stock No. QMA16M

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordere
Q.Max Sheet Metal Punch 17.5mm
£11.30  
Q.Max Sheet Metal Punch 17.5mm Stock No. QMA175M

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordere
Q.Max Sheet Metal Punch 18.6mm
£11.30  
Q.Max Sheet Metal Punch 18.6mm Stock No. QMA186M

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordere
Q.Max Sheet Metal Punch 19mm
£11.30  
Q.Max Sheet Metal Punch 19mm Stock No. QMA19M

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordere
Q.Max Sheet Metal Punch 1in
£12.67  
Q.Max Sheet Metal Punch 1in Stock No. QMA1

A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge. The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches boxed singly without key, which should be orde
Q.Max Sheet Metal Punch 20.4mm
£12.11  
Q.Max Sheet Metal Punch 20.4mm Stock No. QMA204M

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordere
Q.Max Sheet Metal Punch 20mm
£12.11  
Q.Max Sheet Metal Punch 20mm Stock No. QMA20M

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordere
Q.Max Sheet Metal Punch 21mm
£12.11  
Q.Max Sheet Metal Punch 21mm Stock No. QMA21M

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordere
Q.Max Sheet Metal Punch 22.5mm
£12.22  
Q.Max Sheet Metal Punch 22.5mm Stock No. QMA225M

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordere



[1][2][3]

Powered By TABS For Tools We Accept Visa, Mastercard,Switch,Maestro,Solo,Visa Electron and Delta.

ę 2020 Toolline
Monday 26th October 2020