|
|
|
|
 |
Stock No. MAU17001
Straight edge for accurate marking out with a carpenters pencil or metal scriber. Accuracy is 0.01% of the length of the straight edge.1 x Maun Carbon Steel Straight Edge 100cm (40in)
|
|
|
 |
Stock No. MAU170148
Straight edge for accurate marking out with a carpenters pencil or metal scriber. Accuracy is 0.01% of the length of the straight edge.Size 1200 x 50 x 6mm (48 x 2 x 1/4in).
|
|
|
|
Stock No. MAU170112
Straight edge for accurate marking out with a carpenters pencil or metal scriber. Accuracy is 0.01% of the length of the straight edge.1 x Maun Carbon Steel Straight Edge 30cm (12in)
|
|
|
|
Stock No. MAU170118
Straight edge for accurate marking out with a carpenters pencil or metal scriber. Accuracy is 0.01% of the length of the straight edge.1 x Maun Carbon Steel Straight Edge 45cm (18in)
|
|
|
 |
Stock No. MAU170124
Straight edge for accurate marking out with a carpenters pencil or metal scriber. Accuracy is 0.01% of the length of the straight edge.1 x Maun Carbon Steel Straight Edge 60cm (24in)
|
|
|
|
Stock No. MAU170130
Straight edge for accurate marking out with a carpenters pencil or metal scriber. Accuracy is 0.01% of the length of the straight edge.1 x Maun Carbon Steel Straight Edge 76cm (30in)
|
|
|
|
Stock No. MAU170136
Straight edge for accurate marking out with a carpenters pencil or metal scriber. Accuracy is 0.01% of the length of the straight edge.Size: 900 x 50mm (36 x 2in).
|
|
|
 |
Stock No. MAU2990140
The essential feature of all Maun Diagonal Cutting Nippers is the accuracy of the cutting edges and the quality of the steel and heat-treatment. The compound lever design gives good mechanical advantage, allowing the plier to cut piano wire with handle loads significantly less than conventional forged pliers of equivalent size.Size. 5.1/2in - 140m
|
|
|
|
Stock No. MAU2990160
The essential feature of all Maun Diagonal Cutting Nippers is the accuracy of the cutting edges and the quality of the steel and heat-treatment. The compound lever design gives good mechanical advantage, allowing the plier to cut piano wire with handle loads significantly less than conventional forged pliers of equivalent size.Size. 6.1/2in - 160m
|
|
|
 |
Stock No. MAU2999160
The essential feature of all Maun Diagonal Cutting Nippers is the accuracy of the cutting edges and the quality of the steel and heat-treatment. The compound lever design gives good mechanical advantage, allowing the plier to cut piano wire with handle loads significantly less than conventional forged pliers of equivalent size.Length 160mm (6 1/2
|
|
|
 |
Stock No. MAU3010150
The compound lever design of the end cutting nipper gives excellent cutting performance with low handle load. This is ideal for the reactive cutting operations encountered in the spring, and bedding production. Length: 150mm (6in).
|
|
|
 |
Stock No. MAU2570005
Combination unsleeved eyelet pliers- punches and eyelets in one combined operation.Length 200mm (8 in)Complete with 100 4mm (5/32 in) Eyelets.
|
|
|
|
Stock No. MAU2570007
Combination unsleeved eyelet pliers- punches and eyelets in one combined operation.Length 200mm (8 in).Complete with 50 5.55mm (7/32 in) Eyelets.
|
|
|
|
Stock No. MAU2570165
Combination unsleeved eyelet pliers- punches and eyelets in one combined operation.Size 200mm (8 in)Suitable for eyelets of 5/32in only (not supplied).
|
|
|
 |
Stock No. MAU6000
Eyelets for the 2570-165 Eyelet Plier.Pack 100 4mm (5/32 in) diameter
|
|
|
 |
Stock No. MAU6100
Eyelets for the 2570-212 Eyelet PlierBox 50 5.55mm (7/32 in) diameter .
|
|
|
 |
Stock No. MAU4860160
The unique feature of parallel action pliers is that the serrated jaws remain parallel throughout their range of movement. This makes them ideal for holding and gripping components and for manipulating wire which can be fed down the throat of the plier and held firmly over the full length of the jaws. Size: 160mm (6 1/2in).
|
|
|
 |
Stock No. MAU4870140
The unique feature of parallel action pliers is that the serrated jaws remain parallel throughout their range of movement. This makes them ideal for holding and gripping components and for manipulating materials which can be fed down the throat of the plier and held firmly over the full length of the jaw. Size: 140mm (5 1/2in).
|
|
|
 |
Stock No. MAUWPKI
Kits comprise of a single wad punch handle onto which screws a series of nine interchangeable punches. The handles are blackened and punches heat treated and chemically blacked. The handle should be struck with a hammer or mallet onto a wooden block. The spring loaded plunger in the handle enables holes to be accurately centred and serves to eject
|
|
|
|
Stock No. MAUWPKM
Kits comprise of a single wad punch handle onto which screws a series of nine interchangeable punches. The handles are blackened and punches heat treated and chemically blacked. The handle should be struck with a hammer or mallet onto a wooden block. The spring loaded plunger in the handle enables holes to be accurately centred and serves to eject
|
|
|
 |
Stock No. MAU3080
The Maun Ratchet Cable Cutter cuts copper and aluminium cables up to 30mm in diameter. It also cuts steel wire armoured cable up to 20mm in diameter. The ratchet control makes cutting easy and the hinged blade allows for cutting to commence in confined spaces. The release lever allows the blade to be released during the cutting process if required
|
|
|
 |
Stock No. MAU2230200
The Revolving Punch Plier offers 6 heat-treated punches which are held on a locking taper solid steel drum. The correct size punch can be selected by simply rotating the drum. For punching holes in soft material such as leather etc. Punch sizes: 2, 2.5, 3.0, 3.5, 4 and 5mm. (5/64, 3/32, 7/64, 1/8, 5/32 and 3/16 in).
|
|
|
 |
Stock No. MAU1773012
The Maun Metric/Imperial Safety Rule has a unique M profile which keeps the fingers well away from any knife edge when used for cutting or scoring card etc. The rule is made from stainless steel to give a long corrosion free life. Ideal for hobby work and craft work in the educational field.
|
|
|
|
Stock No. MAU1774300
The Maun Metric Safety Rule has a unique M profile which keeps the fingers well away from any knife edge when used for cutting or scoring card etc. The rule is made from stainless steel to give a long corrosion free life. Ideal for hobby work and craft work in the educational field.
|
|
|
 |
Stock No. MAU2850100
A flat cutter for wire with hardened steel plate jaws.The handles are zinc plated and are fitted with a return spring. Used for cutting soft wire.Unsleeved.
|
|
|
 |
Stock No. MAU4950160
This high leverage side cutting plier has serrated flat jaws with a built-in cutter on the side which is capable of cutting ISO standard piano wire.Size: 165mm (6 1/2 in).
|
|
|
