|

|
 |
Stock No. INDCB24
Designed specially for use by carpenters and mechanics. These stones may be used dry or with oil.These INDCB24 Aluminium Oxide bench stones have the same grit throughout.Size: 4 x 1 x 1/2n.Grade: Coarse.
|
|
 |
Stock No. INDCB8
Designed specially for use by carpenters and mechanics. Ideal for sharpening dull tools. Produces a keen lasting edge. These stones may be used dry or with oil. The IB8 combination stone has one coarse and one fine face.These INDCB8 aluminium oxide stones have the same grit throughout.Type.CB8Size.8 x 2 x 1 in.Grade.Coarse.
|
|
 |
Stock No. INDCF214
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Round.Type. CF114.Size. 100 x 6mm (4 x 1/4 in).Grade. Coarse.
|
|
 |
Stock No. INDCF34
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Square.Type. CF34.Size.100 x 10mm (4 x 3/8 in).Grade. Coarse.
|
|
 |
Stock No. INDFB24
Designed specially for use by carpenters and mechanics. These stones may be used dry or with oil.These FB24 alumimium Oxide bench stones have the same grit throughout.Size: 4 x 1 x 1/2in.Grade: Fine.
|
|
 |
Stock No. INDFB8
Designed specially for use by carpenters and mechanics. Ideal for sharpening dull tools. Produces a keen lasting edge. These stones may be used dry or with oil. The IB8 combination stone has one coarse and one fine face.These iINDFB8 aluminium oxide stones have the same grit throughout.Size.8 x 2 x 1 in.Grade. Fine.
|
|
 |
Stock No. INDFF114
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.TriangularType. FF114.Size. 100 x 6mm (4 x 1/4 in).Grade. Fine.
|
|
 |
Stock No. INDFF14
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Square.Type. FF14.Size. 100 x 6mm (4 X 1/4 in)Grade. Fine.
|
|
 |
Stock No. INDFF144
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.TriangularType. FF144.Size. 100 x 12mm (4 x 1/2 in).Grade. Fine.
|
|
 |
Stock No. INDFF214
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Round.Type. FF214.Size. 100 x 6mm (4 x 1/4 in).Grade. Fine.
|
|
 |
Stock No. INDFF244
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Round.Type. FF244.Size. 100 x 12mm (4 X 1/2 in).Grade. Fine.
|
|
 |
Stock No. INDFF34
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Square.Type. FF34.Size. 100 x 10mm (4 x 3/8 in).Grade. Fine.
|
|
 |
Stock No. INDFF344
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Half Round.Type. FF344.Size. 4 x 1/2 in.Grade. Fine.
|
|
 |
Stock No. INDFS14
Slip stones are designed specifically for sharpening the inside edge of lathe tools and gouges.These aluminium oxide stones cut rapidly and hold their shape perfectly.Type. FS14.Size. 100 x 25 x 11 x 5mm (4 X 1x 7/16 x 3/16 in).Grade.Fine. With 1 round edge.
|
|
 |
Stock No. INDFS44
Slip stones are designed specifically for sharpening the inside edge of lathe tools and gouges.These aluminium oxide stones cut rapidly and hold their shape perfectly.Type. FS44.Size. 115 x 45 x 13 x 5mm (4 1/2 x 1 3/4 x 1/2 x 3/16 in)Grade. Fine. With 1 round edge.
|
|
 |
Stock No. INDIB24
Designed specially for use by carpenters and mechanics. These stones may be used dry or with oil.Combination stones INDIB24 are made with one face coarse or medium, and one face of fine cut.Size: 4 x 1 x .1/2in.Grade: Fine/Coarse.
|
|
 |
Stock No. INDIB6
Designed specially for use by carpenters and mechanics. Ideal for sharpening dull tools. Provide a keen lasting edge. These stones may be used dry or with oil. The IB6 combination stone has one coarse and one fine face.
|
|
 |
Stock No. INDIB8
Designed specially for use by carpenters and mechanics. Ideal for sharpening dull tools. Produces a keen lasting edge. These stones may be used dry or with oil. The IB8 combination stone has one coarse and one fine face.Combination stones INDIB8 are made with one face coarse and one face of fine cut.Size. 204mm x 50mm x 25mm Fine/Coarse.
|
|
 |
Stock No. INDMB24
Designed specially for use by carpenters and mechanics. These stones may be used dry or with oil.These INDMB24 aluminium oxide bench stones have the same grit throughout. Size: 4 x 1 x 1/2 in.Grade: Fine.
|
|
 |
Stock No. INDMB8
Designed specially for use by carpenters and mechanics. Ideal for sharpening dull tools. Produces a keen lasting edge. These stones may be used dry or with oil. The IB8 combination stone has one coarse and one fine face.These INDMB8 aluminium oxide bench stones have the same grit throughout, medium for sharpening dull tools Size.8 x 2 x 1 in.Grade
|
|
 |
Stock No. INDMF114
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.TriangularType. MF114.Size. 100 x 6mm (4 X 1/4 in).Grade. Medium.
|
|
 |
Stock No. INDMF134
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.TriangularType. MF134.Size. 100 x 10mm (4 x 3/8 in).Grade. Medium.
|
|
 |
Stock No. INDMF14
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Square.Type. MF14.Size.100 x 6mm (4 x 1/4 in).Grade. Medium.
|
|
 |
Stock No. INDMF144
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.TriangularType. MF144.Size. 100 x 12mm (4 x 1/2 in).Grade. Medium.
|
|
 |
Stock No. INDMF214
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Round.Type.MF214.Size. 100 x 6mm (4 x 1/4 in).Grade.Medium.
|
|
 |
Stock No. INDMF244
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Round.Type. MF244.Size. 100 x 12mm (4 X 1/2 in).Grade. Medium.
|
|
|